Accessories / Spares - Fittings

ITEM	DESCRIPTION	PRICE	QUANTITY
	EF20 click for compatibility The NEW 90 degree Elbow fitting with Male AN-6 end.	Ł ea.
	BF125 This Banjo fitting can be rotated through 360 degrees and then locked off by tightening the Stainless Steel shaft. Viton bonded washers compress down to seal the fitting. The Fitting is machined with a 1/4" NPT thread on the grey part, and an AN-4 with 37.5 degree flare on the blue part.	Ł ea.
	BF250 This Banjo fitting can be rotated through 360 degrees and then locked off by tightening the Stainless Steel shaft. Viton bonded washers compress down to seal the fitting. The Fitting is machined with a 1/4" NPT thread on the grey part, and an AN-6 with 37.5 degree flare on the blue part.	Ł ea.
	MF20 click for compatibility The MF20 Male fitting has a -6 or 9/16 UNF external thread. Weight each 12g with Viton(R) 'O' ring.	Ł ea.
	FF20 click for compatibility The FF20 Female fitting is machined with an internal 1/4" NPT tapered thread. It can be taken of and rotated so if it is used in conjunction with an elbow fitting (AN822-6D) the fitting can be clocked to position. Weight each 11g with Viton(R) 'O' ring.	Ł ea.
	BF20 click for compatibility The BF20 has a Male AN-6 external thread which can be fully rotated and tightened in place. Weight each 47g with Viton(R) 'O' ring.	Ł ea.
	HF20 click for compatibility The HF20 is a Hose barb fitting for 3/8" ID rubber fuel pipe. Weight each 9g with Viton(R) 'O' ring.	Ł ea.
	BF20-H click for compatibility The BF20-H has a Hose barb fitting for 3/8" ID rubber fuel pipe, which can be fully rotated and tightened in place. Weight each 47g with Viton(R) 'O' ring.	Ł ea.
	MF20-L click for compatibility The MF20-L Male fitting has a -4 or 7/16" x 20 UNF external thread. Weight each 11g with Viton(R) 'O' ring.	Ł ea.
	FF20-A click for compatibility The FF20-A Female fitting has a 1/8" NPT female tapered thread. It can be taken of and rotated so if it is used in conjunction with an elbow fitting (AN822-4D) the fitting can be clocked to position. Weight each 10g with Viton(R) 'O' ring.	Ł ea.
	BF20-J click for compatibility The BF20-J has a Male AN-4 external thread which can be fully rotated and tightened in place. Weight each 45g with Viton(R) 'O' ring.	Ł ea.
	HF20-E click for compatibility The HF20 is a Hose barb fitting to be with 1/4" ID rubber fuel pipe. Weight each 9g with Viton(R) 'O' ring.	Ł ea.
	BF20-E click for compatibility The BF20-E has a Hose barb fitting for 1/4" ID rubber fuel pipe, which can be fully rotated and tightened in place. Weight each 47g with Viton(R) 'O' ring.	Ł ea.
	MF25 click for compatibility The MF25 is a -8 Male fitting and has a 3/4 x 16 UNF thread with 37.5 degree flare for 1/2" aluminum fuel tube.	Ł ea.
	FF25 click for compatibility This Female fitting is machined with a 3/8" NPT pipe thread, it can be taken of and rotated so if it is used in conjunction with an elbow fitting (AN822-8D) the fitting can be clocked to position.	Ł ea.
	EF25 click for compatibility The EF25 is a Male -8 fitting and has a 3/4 x 16 UNF thread with 37.5 degree flare for 1/2" aluminum fuel tube.	Ł ea.
	BF25 click for compatibility The BF25 is a Male -8 fitting and has a 3/4 x 16 UNF thread with 37.5 degree flare for 1/2" aluminum fuel tube. The blue section can be rotated through 360 degrees and locked off.	Ł ea.
	ORO20 Spare Viton(R) for '20' 3/8" Fittings	Ł ea.
	ORO25 Spare Viton(R) for '25' 1/2" Fittings	Ł ea.

Total Cost of Items Ł0.00

SHOPPING

View Cart

Check out

How to Shop

Shipping

Distributors

Terms &

Conditions

ANDAIR

NEWS

Videos

FAQ

Shows

Our Location

DOWNLOADS

Tech Sheets