Locking Fuel Caps
Accessories / Spares - Gascolators
Drain Valve - DV125
New to Andair's product line is this all Stainless Steel Drain Valve. Machined with 1/8" NPT and using a Viton(R) O-ring, this drain valve will not corrode or leak.
Collector Cup - CC125
To sample fuel for water contamination use our new sample cup. It can be used with all standard drain valves and is light and easy to use. The snap on lid prevents the nasty fumes lurking in the cockpit and there is no need to worry about the wind as the cup also acts as a shield. Made from anodised aluminium.
Mini Gascolator Filter - FIA125
This FIA375 is the replacement filter for the Mini Gascolator (GAS125). It if a push on type filter and has a 70 micron filtration capacity.
GAS375 Filter - FIA375
To replace the filter on the GAS375. Recently this has been redesigned to a convoluted mesh as shown. This gives 2.5x the filtration area as before. The FIA375s' filter material is made from PTFE coated stainless steel mesh with a 70 micron filtration area.
To replace the filter on the GAS500. Recently this has been redesigned to a convoluted mesh as shown. This gives 2.5x the filtration area as before. The FIA500s' filter material is made from PTFE coated stainless steel mesh with a 70 micron filtration area.
Viton(R) O-ring. This is the seal for the Drain Valve (DV125)
Viton(R) O-ring. This is the filter retention o-ring as used on the Mini Gascolator (GAS125)
Viton(R) O-ring. Used to seal the bowl and the main body on the Mini Gascolator
Used to seal the bowl and the main body on the GAS375
Used to seal the bowl and the main body on the GAS500
This is an AN913-1D blanking plug used to cap the primer/pressure tapping port on all Gascolators
Firewall bracket for GAS375 range.
Firewall bracket for GAS500 range.
Total Cost of Items £
©2003 Andair LTD
How to Shop