+44 (0)23 9247 3945 | andair@andair.co.uk
£48.59 This Banjo fitting can be rotated through 360 degrees and then locked off by tightening the Stainless Steel shaft. Viton bonded washers compress down to seal the fitting. The Fitting is machined with a 1/4" NPT thread on the grey part, and an AN-4 with 37.5 degree flare on the blue part. £48.59 This Banjo fitting can be rotated through 360 degrees and then locked off by tightening the Stainless Steel shaft. Viton bonded washers compress down to seal the fitting. The Fitting is machined with a 1/4" NPT thread on the grey part, and an AN-6 with 37.5 degree flare on the blue part. £24.29 The MF20 Male fitting has a -6 or 9/16 UNF external thread.
Weight each 12g with Viton(R) 'O' ring. £24.29 The FF20 Female fitting is machined with an internal 1/4"" NPT tapered thread. It can be taken of and rotated so if it is used in conjunction with an elbow fitting (AN822-6D) the fitting can be clocked to position.
Weight each 11g with Viton(R) 'O' ring. £45.55 The BF20 has a Male AN-6 external thread which can be fully rotated and tightened in place.
Weight each 47g with Viton(R) 'O' ring. £24.29 The HF20-375 is a Hose barb fitting for 3/8" ID rubber fuel pipe. Weight each 9g with Viton(R) 'O' ring. £45.55 The BF20-H has a Hose barb fitting for 3/8" ID rubber fuel pipe, which can be fully rotated and tightened in place.
Weight each 47g with Viton(R) 'O' ring. £24.29 The HF20-312 is a Hose barb fitting for 5/16" ID rubber fuel pipe. Weight each 9g with Viton(R) 'O' ring. £45.55 The BF20-V has a Hose barb fitting for 5/16" ID rubber fuel pipe, which can be fully rotated and tightened in place.
Weight each 47g with Viton(R) 'O' ring. £24.29 The MF20-L Male fitting has a -4 or 7/16" x 20 UNF external thread. Weight each 11g with Viton(R) 'O' ring. £24.29 The FF20-A Female fitting has a 1/8" NPT female tapered thread. It can be taken of and rotated so if it is used in conjunction with an elbow fitting (AN822-4D) the fitting can be clocked to position. Weight each 10g with Viton(R) 'O' ring. £45.55 The BF20-J has a Male AN-4 external thread which can be fully rotated and tightened in place. Weight each 45g with Viton(R) 'O' ring. £24.29 The HF20-250 is a Hose barb fitting to be with 1/4" ID rubber fuel pipe. Weight each 9g with Viton(R) 'O' ring. £45.55 The BF20-E has a Hose barb fitting for 1/4" ID rubber fuel pipe, which can be fully rotated and tightened in place.
Weight each 47g with Viton(R) 'O' ring. £36.44 The MF25 is a -8 Male fitting and has a 3/4 x 16 UNF thread with 37.5 degree flare for 1/2" aluminum fuel tube. £36.44 This Female fitting is machined with a 3/8" NPT pipe thread, it can be taken of and rotated so if it is used in conjunction with an elbow fitting (AN822-8D) the fitting can be clocked to position. £45.55 The EF25 is a Male -8 fitting and has a 3/4 x 16 UNF thread with 37.5 degree flare for 1/2" aluminum fuel tube. £48.59 The BF25 is a Male -8 fitting and has a 3/4 x 16 UNF thread with 37.5 degree flare for 1/2" aluminum fuel tube. The blue section can be rotated through 360 degrees and locked off.
Small Banjo
BF125
Large Banjo
BF250
AN-6 Male Fitting
MF20
1/4 NPT Female Fitting
FF20
Adjustable AN-6 Male fitting
BF20
Hose fitting for 3/8" ID Rubber tube
HF20-375
Adjustable Hose Fitting for 3/8" ID Rubber tube
BF20-H
Hose fitting for 5/16" ID Rubber tube
HF20-312
Adjustable Hose Fitting for 5/16" ID Rubber tube
BF20-V
AN-4 Male Fitting
MF20-L
1/8 NPT Female Fitting
FF20-A
Adjustable AN-4 Male Fitting
BF20-J
Hose fitting for 1/4 ID Rubber tube
HF20-250
Adjustable Hose Fitting for 1/4 ID Rubber tube
BF20-E
AN-8 Male fitting
MF25
3/8" NPT Female Fitting
FF25
Male-8 Elbow fitting
EF25
Adjustable AN-8 Male fitting
BF25
Address: Unit 6, Fishers Grove, Portsmouth, Hampshire, PO6 1EF ENGLAND
Location: Andair is located on the north side of Portsmouth in the south of England, about 90 miles from London. Click here for detailed directions and a location map.
Telephone: +44(0)23 9247 3945
Fax: +44(0)23 9247 3946
Email: andair@andair.co.uk