Home > Shop > Duplex Fuel Selectors

Duplex Fuel Selectors

Duplex Fuel Selectors are valves that have two separate compartments allowing two independent fuel lines to be switched simultaneously. This makes them ideal for fuel injected engines where a return line is needed. One significant benefit of these valves is that fuel can be returned to the same tank from which it was drawn thus preventing the need to dump fuel overboard. They can be supplied for either 3/8" or 1/2" supply lines.

All Andair valves are designed for safety and incorporate several design features that allow a positive selection action. There is a large red lever with 'Fuel' engraved on it and a clearly labelled fascia plate to indicate which tank has been selected. The lever also incorporates a safety detent mechanism. This feature acts in two ways. It allows for a good solid detent at each tank position and also the button on top of the lever must be raised to switch the fuel off. All these features help prevent the pilot switching the wrong tank or turning the fuel off.

Manufactured to the highest standards, all Andair valves give a precise and smooth feel in operation and can be supplied with custom engraving.

For the FS20, FS25 and Duplex valves we also offer a choice of fittings and extensions.

Click on the images below to configure and buy the exact specification you require.

<< Back to Category List

Product Image

from £141.75

FS15 Duplex Fuel Selector

The FS15-D2 is a three-way ¼” Duplex Fuel Selector with the positions LEFT - RIGHT - OFF. There is a 90 degree action between each tank selection. This valve has the tank connection ports at the Left and Right hand side and the outlet feed and input return ports are towards the front. Supplied with a silver coloured anodized fascia plate.

View more information...

Product Image

from £231.00

FS22 Duplex Fuel Selector

The FS22 Duplex fuel selector is a 3/8" feed and 1/4" vapour return valve, allowing you to switch between two fuel tanks (LEFT - RIGHT) of a fuel injected engine. It was designed with the Rotax 914 in mind, but is suitable for other applications. Supplied with a silver colour anodised fascia plate.

View more information...

Product Image

from £229.95

FS2020 Duplex Fuel Selector

The FS2020 is a 3-way 3/8” Duplex Fuel Selector designed for fuel-injected engines up to 200HP. It allows for two lines to be switched simultaneously, this means that the return fuel can be returned to the same tank from which it was drawn. The valve has the positions LEFT - RIGHT - OFF.

View more information...

Product Image

from £288.75

FS2520 Duplex Fuel Selector

The FS2520 is a 3-way Duplex Fuel Selector that allows for two lines to be switched simultaneously, this means that the return fuel can be returned to the same tank from which it was drawn. valve has a 3/8" compartment at the top of the valve, and a 1/2" section at the bottom. The 1/2" part would be used for the feed and the 3/8" for the return. The valve has the positions LEFT - RIGHT - OFF.

View more information...


Search this site:

Contact

Address: Unit 1, Dunsbury Business Park, Fulflood Road, Havant, Hampshire, PO9 5AX ENGLAND

Location: Andair is located in Havant in the South of England about 90 miles from London. Click here for detailed directions and a location map.

Telephone: +44(0)23 9247 3945

Fax: +44(0)23 9247 3946

Email: andair@andair.co.uk