Andair currently manufactures 2 versions of this small lightweight duplex valve. The PS and the PD. Both versions offer a choice of fittings for the main engine feed line and female 1/8 NPT fittings for the return line.
The PS has the return line fittings pointing in the same direction as the main feed, and the PD has them at 90 degrees to the main feed.
Both Versions can also be supplied with an extension to the lever if required.
1) CHOOSE FITTINGS
2) CUSTOMISE FASCIA
3) ADD TO CART
UPPER FITTING
LEFT FITTING
RIGHT FITTING
LOWER FITTINGS
Aerial View
Side View
OPTIONS
Anodised Finish
Countersunk Mounting Holes
Extension Configuration
The following options are available for our extension valves, universal joints at either end of the extension,as well as a joining section for the middle that allows for different orientation of the valve and lever assemblies.
Extension tubes come in 6 inch increments, up to a maximum of 48 inches. The standard extension tube length is 6 inches. Further lengths cost at (£11.50). Shipping surcharges built into the price apply for 30" lengths and above.
Select the desired extension length:
Your item summary:
Model Number:
FS22-D2
Cost:
£
Price excludes UK VAT which will be charged where applicable
Engraving (The fascia plate will come with standard engraving if no custom engraving is requested)
Before you complete the addition of this item we would like to offer
you the chance to customise the labelling on the fascia plate for this item.
Included in the cost shown above is a standard fascia plate as depicted below however,
this product can also be specially engraved in the positions shown with either :-
Up to 6 large font characters (£1.99 per char)
Up to 16 smaller font characters (£0.99 per char) over two lines
Address: Unit 6, Fishers Grove, Portsmouth, Hampshire, PO6 1EF ENGLAND
Location: Andair is located on the north side of Portsmouth in the south of England, about 90 miles from London. Click here for detailed directions and a location map.
